Low Slip Copper Wire Drawing Machine With Elephant Nose Type Take Up Machine

description

1. the usage and form

1.1 usage:use for draw cooper rod from 8mm to 3mm or 2.6mm

2. place and parameter of factory

• installation side: place of user

2.1 power paramenter

2.2.1. electric:voltage:380V, frequency:50Hz

2.2.2. Water:Industrial water pressure:0.15～0.25MPa

3. technical parameter

3.1 basic parameter

3.1.1. model:JC-RWD450-11D

3.1.2. variety and material for produce:

3.1.2.1. variety kind of product:φ2.0mm copper rod

3.1.2.2. brand No.: copper wire for electrican

3.1.3. total power:main machine(300KW)+ annealing (400KW)

4. technical requirment

5. brief description

6. key component:

1,pay off 2. drawing power rack(including arc tooth sync belt reducer system,frequency motor,zero slip tension system) 3. foundation drawing 4. continuous annealing machine(transformer with annealing) 5. coiling system 6. emulsion system 7. electrical system 8 poining machine 9 input guide wheel device；

7. Charicteristics and advantages of 9D in-line zero slip RBD equipment (here below is called equipment)

Driven by the different variable-frequency motor, the second flow of each drawing process of the will be the same even when changing the hole type and the RPM of the drum.the hole type of the drawing mold can be changed according to the need, the RPM of each drawing drum can be set through the touch scream. So on the base of enough strength of the frame, different size of the copper rod can be drawed through the equipment since difference section reduction rate can be used on dirfferent size and diifferent material of the wore..Inported NSK or famous brand bearing wil be used.

Low slop rate and the good synchronism can reduce the lost energy into 20-30% due to the friction between the wire and the drum.

Low slip means the low brase of the drum, so the copper powder can be redused to keep the surface of the wore and other conductors.

8. technology parameter

9. blank:φ8.0mm

10. output dia:φ2.0mm～φ2.6mm

11. drawing process:9

12. drawing speed : Max speed 1000m/min

13. average reduction rate:23.6%

14. variable range for reduction rate of each proces:15%～27%

15. main paramenter for equipment

16. host machine

17. running way:9 drawing rack individual drive and frequency control

18. operating mode: PLC control,touch screen dispaly

19. type: free conbination for each drawing rack

20. drawing wheel size:φ450mm

21. No. Of drawing rack:9pcs

22. main motor: 9pcs 30kw-75kw AC frequency motor

23. structure:welding assembly

24. coling power:18.5kw AC motor

25. payy off way: longmen type

26. coiling way: elephant nose take up machine

27. cooling way:half immersed

28. plate szie(mm):Φ800 coilng plate

29. coling capacity: 800-1500KG

30. voltage:three phase AC 380V

31. elephant nose type take up machine

32. technical parameter